Aftermarket Bar Mounts?
Hi, are any aftermarket handlebar mounts available for the Trail 2 Bike (Quadlock, Ram, etc) apart from the mount included in the box?
Is the TwoNav locking system compatible with any other manufacturer (e.g. maybe it clicks into another system)?
I'm even considering filing off the TwoNav mount from the back of the trail 2 and using a Quadlock univeral adapter.
Thanks.
-
Hello,
Take time here On the TwoNav Web site
You can also use Garmin /bryton compatible mounts sold by Amazon, as in this image the TwoNav quick lock delivered mounts on the bryton like a Russian doll...
Or
Or
On Handlebar or on the Garmin as above..
I tried all the solutions from the position on the pivot, the handlebars, the stem, the advanced mounting solution (triathlon type) on a rigid support is from my point of view ideal.
To facilitate the reading of the screen, the position in front of the hanger on a garmin support is ideal, the support sold at Amazon is in aluminum it does not vibrate.
An other user
-
Hello,
No, the fingerprints of the quick locks are not the same. You only put the "elastic" (like the photo) to center it. Then use 4 small black clamps (3 mm) quick tightening, everything will be very rigid. You can put a little glue between the Bryton and Twonav supports which partially fit together. The final assembly is clean and rigid, I rode again this afternoon with this solution.
Best regards
-
Thank you. Your solution looks pretty clean. So if I understand correctly, I can use a Garmin or Bruton mount, but the TwoNav handlebar stem mount must be attached to it, 'piggy back' style. I was hoping the 'male' part on the back of the Trail 2 unit would click into a Garmin 'female' mount, without the need for the TwoNav mount to be attached by rubber bands
Bitte melden Sie sich an, um einen Kommentar zu hinterlassen.
Kommentare
3 Kommentare