1 - Download and install 'Land'/'Air' software: http://www.twonav.com/en/support/downloads
2 - Connect your GPS to PC's USB port. The new device will appear in 'Storage files' section of the data tree.
3 - Right click on the name of the GPS in data tree and select 'Update TwoNav software'.
4 - If there is an available update for your device, download button will appear. Accept it and 'TwoNav' will be updated automatically.
Important: Manual update is a dangerous process, because it may cause loss of important system files if it is not done correctly. In order to update the 'TwoNav' software of your GPS, your device requires a minimum of battery charged.
1 - Connect your GPS to the PC with the USB cable. After that, you will see your device (internal memory of the device) appear in your system.
2 - Download 'AnimaXXX.zip' (for example) from: http://www.twonav.com/en/support/downloads
3 - Unzip the content of the downloaded file 'AnimaXXX.zip' at 'TwoNav' folder of 'Anima' unit (internal memory of the device).
4 - You will be asked for confirmation when overwriting. Accept overwriting all files, but never delete any file of this folder manually.
5 - Disconnect your device from the PC and start it normally.
Note: Mac devices don't need to unzip the file, its content will be automatically unzipped inside 'Download' folder.