Comments

3 comments

  • Avatar
    Thierry CHARLÈS

    Hello,

    It is a user who answers you, to ask Two Nav the question use the link "send a request at the top of this page".

    No, TwoNav "QuickLock" fingerprints are not standardized, they are different.

    Attention the TRAIL 2 is an exellent GPS OUTDOOR it is large and relatively heavy if you put it in front of the painter on the QuickLock the hull will break (Look on another post the return of a user).

    Use this support and install a vibration / shock absorber between the stem and the GPS.

    Apart from the small counters if you install a GPS on a remote Quick Lock it will inevitably break down at a time without you being able to make the link with the fixing mode. The vibrations and shock of the ATV are transmitted and amplified while vibrating inside.

    The good Issue

     

    Add this Decathlon tool (6€) betwwen the TwoNav Mont and the mountain bike stem

     

    Two 3 mm holes, two rilsan collar, a layer of double-sided velcro to support the QuickLock supplied with the GPS to the decathlon support, 1 h of DIY

     

    To avoid this fatal issue

     

    Best regards

    0
    Comment actions Permalink
  • Avatar
    Gert M.

    Hello Eyal,

    using an adapter like this one

    https://bikespot.es/twonav-accesorios/599-adaptador-velo2edge.html

    it should be possible.

    0
    Comment actions Permalink
  • Avatar
    Thierry CHARLÈS

    Hello,

    A solution  with a vibration and shock absorber between the stem and the GPS at low cost only 6€.

    Quick lock is provide with the GPS and the D4 is avaialable here.

     

     

    0
    Comment actions Permalink

Please sign in to leave a comment.