Resolución TwoNav Android 3.3.12
Buenas tardes,
Existe alguna manera de modificar la resolución de TwoNav en Android ? tengo una tablet donde la aplicación aprovecha mucho mejor el espacio pero en cambio en una radio Android de coche la resolución es pequeña y no aprovecha bien la pantalla, he probado otras aplicaciones y si reconocen la resolución y se adaptan mejor al espacio disponible.
A nivel de configuración no he llegado ver nada pero igual existe algún archivo en alguna carpeta de la instalación de Android que pueda permitir modificar ciertos parámetros para aumentar la resolución de la pantalla.
Paso unas imágenes de TwoNav y de Sygic para ver la diferencia.
-
It is possible, the gps.ini entry is either:
[Windows]
WindowsScale4=
or
[Windows]
UIWindowsScale=
You need either root to do this or have to manipulate the apk especially the options.cxml inside with something like this:
<Property name="{G199}" type="4" c1="Windows" c2="WindowsScale4">
<Value id="-1" Text="{K74}"/>
<Value id="0" Text="X0"/>
<Value id="0.5" Text="X0.5"/>
<Value id="0.6" Text="X0.6"/>
<Value id="0.7" Text="X0.7"/>
<Value id="0.8" Text="X0.8"/>
<Value id="0.9" Text="X0.9"/>
<Value id="0.5" Text="X0.5"/>
<Value id="0.6" Text="X0.6"/>
<Value id="0.7" Text="X0.7"/>
<Value id="0.8" Text="X0.8"/>
<Value id="0.9" Text="X0.9"/>
<Value id="1" Text="X1"/>
<Value id="1.1" Text="X1.1"/>
<Value id="1.2" Text="X1.2"/>
<Value id="1.3" Text="X1.3"/>
<Value id="1.4" Text="X1.4"/>
<Value id="1.5" Text="X1.5"/>
<Value id="1.6" Text="!!!!X1.6!!!!!"/>
<Value id="1.7" Text="X1.7"/>
<Value id="1.8" Text="X1.8"/>
<Value id="1.9" Text="X1.9"/>
<Value id="2" Text="X2"/>
<Value id="3" Text="X3"/>
<Value id="4" Text="X4"/>
</Property> -
HelloThanks for the information, I have located the options.cxml file within the "assets" folder, the content of the section G199 is :
<Property name="{G199}" type="4" c1="Windows" c2="WindowsScale4">
<Value id="-1" Text="{K74}"/>
<Value id="0" Text="X1"/>
<Value id="2" Text="X2"/>
<Value id="3" Text="X3"/>
<Value id="4" Text="X4"/>
</Property>
I literally changed it for the following? or just a part?<Property name="{G199}" type="4" c1="Windows" c2="WindowsScale4">
<Value id="-1" Text="{K74}"/>
<Value id="0" Text="X0"/>
<Value id="0.5" Text="X0.5"/>
<Value id="0.6" Text="X0.6"/>
<Value id="0.7" Text="X0.7"/>
<Value id="0.8" Text="X0.8"/>
<Value id="0.9" Text="X0.9"/>
<Value id="0.5" Text="X0.5"/>
<Value id="0.6" Text="X0.6"/>
<Value id="0.7" Text="X0.7"/>
<Value id="0.8" Text="X0.8"/>
<Value id="0.9" Text="X0.9"/>
<Value id="1" Text="X1"/>
<Value id="1.1" Text="X1.1"/>
<Value id="1.2" Text="X1.2"/>
<Value id="1.3" Text="X1.3"/>
<Value id="1.4" Text="X1.4"/>
<Value id="1.5" Text="X1.5"/>
<Value id="1.6" Text="X1.6"/>
<Value id="1.7" Text="X1.7"/>
<Value id="1.8" Text="X1.8"/>
<Value id="1.9" Text="X1.9"/>
<Value id="2" Text="X2"/>
<Value id="3" Text="X3"/>
<Value id="4" Text="X4"/>
</Property>I have also located the gps.default file within the assets folder and there is a parameter called "WindowsScale4" which by default is -1, I have tried with 3 different installers setting this value to 0, 1 and -2 and it does not change the resolution .
Thanks
-
Hi Manuel, I'm in the mountains, internet is scare. G199= "Interface size".
-1 means it is using the default value.
gps.default is providing the standard values for the installation. No need to change it. Change it later within the settings (Interface size is located in the advanced section.
Just replace the values with mine gives more finetuning options, since your GUI seems to be to big, try this (interesting for you are the values between 0 and 1):
<Property name="{G199}" type="4" c1="Windows" c2="WindowsScale4">
<Value id="-1" Text="{K74}"/>
<Value id="0" Text="X0"/><Value id="0.1" Text="X0.1"/>
<Value id="0.2" Text="X0.2"/>
<Value id="0.3" Text="X0.3"/>
<Value id="0.4" Text="X0.4"/>
<Value id="0.5" Text="X0.5"/>
<Value id="0.6" Text="X0.6"/>
<Value id="0.7" Text="X0.7"/>
<Value id="0.8" Text="X0.8"/>
<Value id="0.9" Text="X0.9"/>
<Value id="1" Text="X1"/>
<Value id="1.1" Text="X1.1"/>
<Value id="1.2" Text="X1.2"/>
<Value id="1.3" Text="X1.3"/>
<Value id="1.4" Text="X1.4"/>
<Value id="1.5" Text="X1.5"/>
<Value id="1.6" Text="X1.6"/>
<Value id="1.7" Text="X1.7"/>
<Value id="1.8" Text="X1.8"/>
<Value id="1.9" Text="X1.9"/>
<Value id="2" Text="X2"/>
<Value id="3" Text="X3"/>
<Value id="4" Text="X4"/>
</Property> -
I just checked it for you. You are right, there are no changes visible in the system. They must have disabled that option somewhere in the version 3 line. Neither changing [Windows] UIWindowsScale= nor WindowsScale4= does have any effect on the outcome. Tested in version 3.3.12 and 5.91.
-
Found what you are looking for, but only for the actual Android version. This is not working with v 3.3.12 but tested to work with 5.91:
<Property name="{G199}" type="4" c1="Windows" c2="millimetersPerMpa" auxparam="restartSW">
<Value id="3.4" Text="3.4mm/Mpa"/>
<Value id="3.6" Text="3.6mm/Mpa"/>
<Value id="3.8" Text="3.8mm/Mpa"/>
<Value id="4.0" Text="4.0mm/Mpa"/>
<Value id="4.1" Text="4.1mm/Mpa"/>
<Value id="4.2" Text="4.2mm/Mpa"/>
<Value id="4.3" Text="4.3mm/Mpa"/>
<Value id="4.5" Text="4.5mm/Mpa"/>
<Value id="4.7" Text="{H1455} 4.7mm/Mpa"/>
<Value id="5.2438" Text="{H349} 5.2438mm/Mpa"/>
<Value id="5.6" Text="{H1456} 5.6mm/Mpa"/>
<Value id="6" Text="{H1457} 6mm/Mpa"/>
<Value id="6.2" Text="6.2mm/Mpa"/>
<Value id="6.5" Text="6.5mm/Mpa"/>
<Value id="6.7" Text="6.7mm/Mpa"/>
<Value id="6.9" Text="6.9mm/Mpa"/>
</Property> -
You could use tracks with integrated waypoints, which are working quite well in recent versions.
I've never understood the in my eyes artificial distinction between routes and tracks and ... activities, since they don't provide autorouting between the fixed points in the above mentioned creations.
-
Hello,
In principle in the latest versions it is again possible to use a succession of WayPoints linked either:
- By a straight line (Bird Fly type),
- By a path that follows the roads, paths or trails
In principle we can either:
- Integrate Ways points into one or other type of path;
- Integrate Road Book Points after the design of the route
- Either integrate them by building the circuit with fast track. Which is starting to work more or less correctly... Although there are always surprises.
Best regards
-
Hello, does this mean that waypoint route files (.rte) work in TwoNav 5? I still do these routes with CompleLand 8 or even if they give me a .gpx I transform it to .rte
When I go in a group they usually give us routes through Waypoints and we navigate by arrow, this is TwoNav 3 it works very well but I thought that in TwoNav 5 they had removed it, I even think that in CompeLand 9 (which I have registered) they could no longer be created .
Thank you.
-
Hello,
Hello, does this mean that waypoint route files (.rte) work in TwoNav 5? I still do these routes with CompleLand 8 or even if they give me a .gpx I transform it to .rte
Yes *.rte format work with Land and Two Nav.
You ca open and save in *.rte & Add Wpt in an *.rte
TwoNav App can open this *.rte format
Best regards
-
Hi, Compe changed to XAPK which can be downloaded here:
https://apkpure.net/twonav-gps-maps-routes/com.compegps.twonav/download
So there is a need to convert to apk with f.i. Split APK Packer by Kirlif:
https://www.andnixsh.com/2020/06/sap-split-apks-packer-by-kirlif-windows.html
After changing the options, icons etc. I use APK_EASY_Tool to sign and zipalign.
Vous devez vous connecter pour laisser un commentaire.
Commentaires
13 commentaires