Aventura 2 battery adapter

Commenti

6 commenti

  • Avatar
    Uwe B.

    Which Aventura is yours? From what I've read it is only compatible with Aventura later than 2018 (puh, the naming is confusing).

    0
    Azioni per commenti Permalink
  • Avatar
    Kevin Burgess

    Aventura 2. Bought it in 2020

    0
    Azioni per commenti Permalink
  • Avatar
    Uwe B.

    There should be a menu in settings called Battery just before the sensor & wifi settings. In its submenu you can set the Batterytype etc..

    PS: You forgot to give details about the Twonav version your device is running. That is suboptimal!

    0
    Azioni per commenti Permalink
  • Avatar
    Thierry CHARLÈS

    When I install it the Aventura keeps turning on and off repeatedly

     

    This assumes that the charge level of the batteries placed in the adapter collapses when the GPS requires energy.

    So either:

    - The installed batteries do not provide enough current (Load, unsuitable capacity, ..)
    - Either the line resistance of the adapter is too high. Therefore a drop in potential when the current is debited.

    Check battery compliance
    Test the electrical resistance of the adapter or connections, it may be a badly crimped wire. With a multimeter check the resistance then the voltage when the GPS is ON it should make the yoyo.

    0
    Azioni per commenti Permalink
  • Avatar
    Kevin Burgess

    Thanks guys. In the battery submenu there are no options to choose. It just says battery. Do I need to do anything to rectify that. It's up to date on software install , latest version and it's Aventura 2

    0
    Azioni per commenti Permalink
  • Avatar
    Uwe B.

    Under Battery there should be an entry: Type

    If selected you can choose between: Alkaline, Lithium, NiMH

     

    If you can't find this entry: Congratulations you have found a bug!

    Contact support for them to fix this, since this is a user forum and Compe does not react to its content.

    0
    Azioni per commenti Permalink

Accedi per aggiungere un commento.